Product Introduction:

　　The liquid absorption specific surface area analyzer is the latest extension of BET static nitrogen adsorption technology, which can automatically determine the volume characteristics of liquid water vapor adsorption based on the increase and decrease of liquid water vapor partial pressure. The liquids used include water and other organic liquids (such as benzene, ethane, and acetone). This innovative instrument allows users to directly test how a particular gas interacts with solids based on temperature, gas concentration, and sample temperature.

　　Product application:

　　Liquid absorption specific surface area analyzer is a very important tool in many industrial fields, including ceramics, catalysts, and pharmaceuticals. The special uses of the instrument include evaluating how long building materials remain intact based on their adsorption properties, the characteristics of non-woven fabrics (such as moisture penetration and absorption), and ceramic properties (including repulsion and absorption).

　　Applicable industries:

　　Ceramic industry, non-woven fabric, powder metallurgy industry

　　Chemicals, pharmaceuticals, biotechnology

　　Product features:

　　1. It can be tested at high temperatures.

　　2. User defined unlimited data points.

　　3. Process all control, measurement, data collection, and report generation based on Microsoft software; Manual control can also be used.

　　4. Compatible with Windows 95 or higher software.

　　5. Present a visual description of the experimental status and results throughout the entire operation process.

　　6. Non destructive testing, with a test length of approximately 8 hours.

　　7. There are many types of acceptable sample types and sizes.

　　8. Multiple sample rooms are available.

　　9. Low maintenance costs.

　　Technical parameters:

　　Project parameters

　　Gap size range 10-500 angstroms

　　Surface area range ≥ 0.01m2/g

　　The sample size can reach a diameter of 1cm

　　Pressure range 10-6Torr~10000Torr

　　Pressurized gases include any non corrosive gases such as nitrogen, krypton, and ammonia

　　Pressure sensor range 100-10000Torr

　　Accuracy 0.15%

　　Resolution 1/60000

　　Power requirements: 110/220V AC, 50/60Hz (other options can be used)

　　Size 60 "H x 24" W x 24 "D

　　Weight 250lbs