Product Introduction:

　　UV disinfection system detector

　　The effectiveness of the UV water disinfection system is as good as that of the sterilization lamp. Over time, even the best UV water treatment systems will experience significant degradation in disinfecting water treatment. The output of the sterilization lamp will also decrease with the age or dirtiness of the lamp. PW254 is specifically designed for continuous monitoring of ultraviolet intensity in high-pressure water disinfection tanks. This detector has a reliable interface with the LM100 sterilization lamp monitor or the monitor or data acquisition device you have selected. Its output is a standard 4-20 mA.

　　The PW254 sterilization lamp detector continuously and accurately monitors the effectiveness of sterilization lamps in water disinfection units.

　　Secure the detection screw to the service port of the water disinfection cabinet. Thread 1 "FPT supply. Other NPF and metric sizes are also available.

　　Product features:

　　Continuous precise detection, NIST tracking - selective, narrow spectral response - only visible UV, SCADA compatible, output -4 to 20 mA

　　Product application:

　　PW254 is specifically designed for continuous monitoring of ultraviolet intensity in high-pressure water disinfection tanks. This detector has a sturdy interface with the solar LM100 sterilization lamp monitor or the display or data acquisition device of your choice.

　　Technical parameters:

　　Name parameter

　　Spectral response 200nm -320nm (PW254-420-BSW)

　　254nm, 10nm FWHM (PW254-420-SSW)

　　Power requirements: 8 to 24VDC, 30mA

　　Output 4-20mA

　　Cable assembly flexible wire

　　Cable length standard 25ft (customizable length)

　　Transport weight 2lbs (1kg)

　　Probe stainless steel coupling element

　　Probe installation 1 "FPT (other NPT and metric sizes)