The Foam Fatigue Testing Machine is a single-station pneumatically driven testing machine. In its standard configuration, it applies a constant load cyclically; a constant displacement mode is also available as an option.
Standards:
This testing machine meets the requirements of ASTM D 3574-03. "Constant Force Impact Dynamic Fatigue Testing."
Features:
1. A PLC-based controller with a color touchscreen display works in conjunction with a 500-pound force sensor and signal conditioner, providing a constant cycle rate of 70 cycles per minute and a proven peak force of 750 Newtons (other sizes, rates, and peak forces are available upon request). The machine compresses foam onto a vented grid beneath the foam specimen. This machine is designed for standard square foam specimens.
2. A variety of indenters are available, but the standard indenter meets the requirements of ASTM D3574.
3. It also offers a gantry-style installation, capable of detecting any location on a mattress (or other large foam surface), suitable for sizes ranging from single to king-size beds.
Technical Specifications:
• Air Consumption
Uses a single-rod cylinder with a 6-inch bore x 4-inch stroke:
2-inch sample thickness: 22 CFM (6 hp continuous operation)
4-inch sample thickness: 29 CFM (8 hp continuous operation)
70 cycles/minute
500 lb load cell
15-inch total sample height
28-inch sample width
24-inch sample depth
Uses workshop compressed air – 90 PSI
Footage area – 29 inches x 34 inches x 36 inches
Voltage – 120 volts or 240 volts
ASTM hole spacing – 15 inches x 15 inches
Anodized aluminum
Intuitive touchscreen
Load or displacement adjustment
Ready to Start?
For help with solutions customized to your business needs, contact Export Director now.
Moocy
Export Director
English
Russian
Español
