Xenon Arc Weatherometer regular maintenance is very important. At the same time, with the continuous development of China’s automobile, electronics, chemical and other markets, the test needs of customers have become increasingly mature, and the characteristics of diversified test needs have become increasingly obvious. The startup has also been studied in depth.

 

 

1. Xenon Arc Weatherometer needs to check items regularly:

 

1.1. Check the water level (water level in the water tank) from time to time before each test;

 

1.2. Before cleaning the inner box every three months, regular maintenance and maintenance at any time;

 

1.3. The replacement of the test cotton cloth becomes hard and not clean before each test;

 

1.4. Carry out regular maintenance of the body every six months.

 

1.5. Check the water level (distribution water level) regularly every three months;

 

1.6. Regular maintenance of the clean power distribution room every six months.

 

2. Xenon Arc Weatherometer wet ball gauze should be replaced regularly: when the surface of the test cloth is dirty or hardened, the test cloth needs to be replaced. The test cloth should be replaced once every 3 months. When replacing, clean the temperature measuring instrument with a clean cloth, and clean it first when replacing a new test cloth.

 

The water storage cylinder of the device should not be too high to cause the water to overflow or be too low, so that the wet ball test cloth absorbs water abnormally and affects the accuracy of the wet ball. The water level can be kept at about six minutes. The water level of the sink can be adjusted to adjust the height of the water tank.

 

 

The above is the QINSUN R&D technical engineer introduced some Xenon Arc Weatherometer maintenance methods, I hope it will be helpful to every customer.