Product Introduction:
The sensor used in the device is the Hamamatsu # G5842 UV sensor/filter, G5842 is a semiconductor ultraviolet sensor composed of GaAsP photodiode chips and ultraviolet filters. Due to its limited spectral response to the UV range of 260 to 400 nm, G5842 is completely insensitive to visible and infrared radiation exceeding 400 nm. The applications of G5842 include solar ultraviolet detection, as its spectral response can match well with the solar ultraviolet spectrum, and the peak of the ultraviolet lamp is close to 365nm ("new generation" fluorescent lamp and "high voltage" HID).
Product operation:
Press and hold the switch button on the front of the solar radiometer. Align the sensor section at the top of the panel directly with the ultraviolet light source. The reading will be displayed on the LCD and can be recorded if necessary.
During operation, the battery voltage is between 9V-6.5V. When the voltage is below 6.5V, The LCD reading will start to blur, and the battery needs to be replaced. In the "typical" mode, the battery can be used for about 2 years
Product features:
This instrument contains an integrated sensor, which is easy to operate and durable. The test reading is accurate, and the data can be directly displayed on the LCD
Product application:
Mainly used for high-intensity UV source and solar instrument testing, it can be used to test UV lamp aging, film UV resistance, lens UV resistance, brown light comparison, and calculate Tts time. It has a wide range of application fields.
Technical parameters:
Name parameter
Model 5.0
Radiation range 0-199.9 mW/cm2 Total UV
Response 280-400 nm (UVB thrust UVA)
Resolution 0.1 mW/cm ²
Update speed 3.0 Readings/Sec
Display 3.5 Digital LCD
Number size 0.4 inch high
Operating temperature from 32 ° F to 100 ° F
Operating humidity of 5% to 80% RH
Accuracy ± 5% REFNIST
Dimensions 4.2L x 2.4W x 0.9D (in.)