A turbine stirrer is a device that forces convection and uniform mixing of liquid and gas media. The main advantage is that when the energy consumption is not high, the stirring efficiency is high, and the stirring generates strong radial flow. Suitable for emulsions, suspensions, etc.

Selection tips for turbine agitators:

1. According to the process conditions, mixing purposes, and requirements, choose the type of agitator. When selecting the type of agitator, it is necessary to fully grasp the dynamic characteristics of the agitator and the causal relationship between the flow state generated by the agitator during the mixing process and various mixing purposes

2. According to the determined agitator type and the flow state generated by the agitator during the mixing process, as well as the control requirements of the process for mixing time, settling speed, and dispersion, the motor power, mixing speed, and agitator diameter are determined through experimental means and computer simulation design

3. According to the motor power, mixing speed, and process conditions, select and determine the reducer model from the reducer selection table. If the reducer is selected based on the actual working torque, the actual working torque should be less than the allowable torque of the reducer

4. Select the same model and specification of frame and coupling as d according to the output shaft head d of the reducer and the support method of the mixing shaft system

5. Select the shaft seal type according to the size of the mixing shaft head, installation capacity, working pressure, and working temperature of the rack

6. According to the nominal center size DN of the rack, the type and pressure rating of the mixing shaft, and the selection of installation bottom cover, flange base, or flange flange

7. Determine whether to configure auxiliary supports based on support and vibration resistance conditions