In order to achieve better application of polymer materials, it is necessary to understand the composition, content, and certain physical and chemical properties of polymer materials, and to conduct component analysis and performance testing of polymer materials.
Test category
Rheological properties
Melt mass (volume) flow rate, molding shrinkage rate
Mechanical properties
Tensile modulus of elasticity, tensile stress, tensile strain, tensile creep modulus, bending modulus, strength, impact strength of simply supported beams (cantilever beams)
Tensile impact strength, Shore (Rockwell) hardness, compressive strength
Thermal performance
Melting temperature, glass transition temperature, load deformation temperature, Vicat softening temperature, linear thermal expansion coefficient, combustibility, oxygen index;
Electrical performance
Relative dielectric constant, dielectric loss factor, volume resistivity, surface resistivity, electrical strength, relative leakage tracing index;
Other performance
Water absorption, density, aging performance, etc
Test items
Water absorption
GB/T1034ASTMD570ISO62
Falling ball impact
Q/SQR.04.094Q/SQR.04.134 (low temperature) Q/SQR.04.137 (low temperature)
Density
DIN53479 Method AASTMD792ISO1183GB/T1033
Ball hardness
DIN53456GB/T3398.1ISO2039.1
Scratch resistance
Q/SQR.04.694Q/SQR.04.137
Tensile strength
HG/T3088QC/T639
Tensile elongation at break
GB/T3923.1GB/T3923.2ISO13934-1ISO13934-2ASTMD5034ASTMD5035
Tensile modulus
HG/T3088QC/T639
Tensile yield strength
HG/T3088QC/T639
Bending strength
GB/T9341ISO178ENISO178ASTMD790
Bending modulus
GB/T9341ISO178ENISO178ASTMD790
Compression strength
GB/T1041ISO604ENISO604
Compression modulus
ASTMD695ISO604GB/T1041
Cantilever beam impact
ASTMD256 (with notch) ASTMD4812 (without notch) ISO180GB/T1843
Simply supported beam impact
ASTMD6110ISO179GB/T1043
Ash content
DINEN60ISO3451GT9345ASTMD5630
Compression permanent deformation
ASTMD395ISO815ISO7759
Aging resistance
UV: ASTMG154.REVASAEJ2020GB/T23987ENISO