The textile fabric shrinkage test is mainly to detect the shrinkage rate of the fabric. Its main principle is to soak the test sample in hot water under certain temperature and humidity conditions, stretch the specimen after the water temperature has stabilized, detect its shrinkage rate and shrinkage value, and finally arrive at the shrinkage rate and shrinkage value, so as to judge the quality of the fabric.

The current test equipment on the market for testing the shrinkage of textile fabrics is the fabric shrinkage tester is an instrument for measuring the shrinkage of fabrics and allows accurate measurement and analysis depending on the type and material of the fabric. It can determine the conformity and quality of the fabric based on the results of the fabric shrinkage in order to provide a better service to the customer.

What is the procedure of the fabric shrinkage tester?

1. Place the test sample in the shrinkage tester and adjust the temperature, humidity and time according to the set parameters.

2. Place the sample on a flat plate and place the shrinkage module in the tester on it.

3. placing the sample in water and adjusting the temperature, humidity and time

4. removing the sample from the water and placing it in the drying module in the shrinkage tester and adjusting the temperature, humidity and time

5. Remove the sample from the shrinkage tester and measure its width and length.

6. Calculate the shrinkage of the sample and record the test results.

The above sharing: QINSUN Instruments - the leading brand in the Fabric Shrinkage Tester Industry. Our Fabric Shrinkage Test Procedure was developed in-house and is available to order.