The Luggage Abrasion Testerr is to put the material on the rotating grinding wheel and press it vertically on the sample, carry out the wear test on the sample with a certain load, a certain speed, and a certain time, and measure the length of the wear scar of the sample. (Any position of the sample is selected. wearable).

Luggage Abrasion Tester application: suitable for wear resistance of rubber, tires, conveyor belts, shoe soles, soft synthetic leather and other materials. The equipment consists of gripper, landing block, control panel, cover, guide rod pulley, roller, collecting tray, caster, indicator light, start key, stop key, fine-tuning key, power key and other components. Abrasion test is a test to measure the amount of abrasion of a sample after a certain period of time or a certain distance under the specified test conditions (load, speed, temperature and humidity, etc.).

Daily use and maintenance of wear testing machine:

1. When the testing machine is used up, pick up the materials of the testing machine, do not put them on the machine table, because some materials will corrode and damage the testing machine.

2. When the testing machine is used up, there will be some debris left on the testing machine, which must be cleaned and wiped to keep the testing machine clean.

3. When the testing machine is used up, be sure to put the grinding wheel on it, and do not press it on the testing machine, which is not good for the testing machine.

4. When the test is completed, be sure to check whether the garbage of the vacuum cleaner is full. When it is full, it must be taken out and thrown away and cleaned up.

The abrasion tester is to put the material on the rotating grinding wheel and press it vertically on the sample, conduct the abrasion test on the sample with a certain load, a certain speed, and a certain time, and measure the length of the wear scar of the sample. wear).