American Taber Taber 710 scratch resistance tester introduction product introduction:

The Taber 710 five-finger scratch tester uses tungsten carbide as the scratch finger to detect surface wear damaged by unconventional defined physical forms (such as scratching, scratching, gouging, etc.).

 

American Taber Taber 710 scratch resistance tester introduces the application object:

Taber 710 five-finger scratch tester is widely used in the automotive industry

The Taber 710 five-finger scratch tester actively detects the abrasion resistance of smooth and textured plastic trim parts in automotive interior and exterior trim parts.

Taber 710 five-finger scratch tester is designed based on the standard technical requirements of the automotive industry

The test sample of Taber 710 five-finger scratch tester is fixed on the testing platform driven by compressed air. The scraping fingers of five independent shafts can be replaced with different weights and optional scraping fingers, which constantly and vertically act on the surface of the test sample. The scraping finger is installed on a hard bench. The operator can use the bracket to fix the scraping finger in a balanced position, so that samples with irregular widths can also be tested.

 

In addition to the development of materials and products, Taber 710 five-finger scratch tester is also suitable for quality control

Design of Five Finger Scratch/Scratch Tester

The Taber 710 five-finger scratch tester is for plastic material evaluation. Testing of hard materials, abrasion resistance, paint, ink, soft metal, oil carpet and other materials.

Features of Taber 710 Scratch Resistance Tester:

Pneumatic, movable platform;

Regulator operation control

Finger scraping with five shafts with weights

Nine weight settings (2N, 3N, 4.5N, 5N, 6N, 7N, 10N, 15N, 20n)

Interchangeable scraping and scratching tools

Robust spring sample holder

Detachable test bench protection board

Electronic timer up to 1/100 second

Air conditioning controller with internal lubrication

 

Taber 710 scratch resistance tester meets the standards:

Ford BN 108-13

General Motors DMN3943

Danmler-Chrysler LP-463DD-18-01 etc.

 

Standard configuration of Taber 710 scratch resistance tester:

Finger scraping assembly (5 pieces)

Scratching fingertips: 1.0mm diameter spherical fingertips (5PCS)

Scratching fingertips: 7.0mm diameter spherical scratching fingertips (5PCS)

A set of weights

Digital display electronic timer

Adjustable sample holder (2PCS/set)

Optional accessories

1.0mm tungsten carbide scratches fingertips

7.0mm tungsten carbide scratches fingertips

*Specially made according to customer requirements

Weight optional accessories

Weight set: including 8N, 13N, 18N

Weight, 25N

 

American Taber related product introduction:

Taber 150B/150E Stiffness Tester

Taber 551 Scratch Tester

Taber 710 Scratch Resistance Tester / Five Finger Scratch Tester

Taber 5135/5155 abrasion tester

Taber 5750 linear abrasion testing machine

Taber 5900 Reciprocating Wear Tester

Taber 6160 Oscillation Abrasion Tester