News

• Color Fastness to Saliva Test

  Determine the resistance of the colour of textiles regarding influence of saliva. This test must be done for fabrics used for baby / infant garments only.

• Light Fastness of Coloured Anodised Aluminium by Polychromal

  The enclosed tests were performed by the Atlas Weathering Services Group Europe of Atlas Material Testing Technology (MTT) GmbH. The European test laboratories of Atlas MTT in Duisburg (Germany) and Paris (France) were accredited to DIN EN I

• Test Methods For Washing Fastness Test

  test methods for Washing Fastness Test

• An Overview Of Hydrostatic Head Test

  An Overview Of Hydrostatic Head Test

• Rub testing methods for evaluating

  Rub testing methods for evaluating

• Colour Fastness of Leather to Water Spotting-EN ISO 15700/IU

  The colour fastness of leather to water spotting is the resistance to the action of water drops on dyed leather surfaces.

• ColourFastness of Leather to Light: Xenon Lamp-EN ISO 105-B0

  This method is intended fordetermining the resistance of the colour of leather tothe action ofa standard artificial light source. The Xenonlamp has an emissionwavelength profile close to daylight.

• The Scratch Test For Laboratory

  The Scratch Test For Laboratory

• Textile Testing Terminology

  This lesson introduces twenty-five terms relevant to testing in the textile industry. These include fabric qualities, performance claims, sampling and testing, and finally, technical properties measured in testing.

• Preliminary High-Temperature Tests of Textile

  Textile Reinforced Concrete (TRC) is a composite material which constitutes a novel structural system with enormous potential in construction.

• Colour Fastness of Leather to Mild Washing

  Fastness of the colour of leather to hand washing is the resistance to washing under mild domestic laundering in water.

• Colour Fastness of Leather to Light:Xenon Lamp

  This method is intended for determining the resistance of the colour of leather to the action of a standard artificial light source. The Xenon lamp has an emission wavelength profile close to daylight.

• Evaluation of Wash and Light Fastness of Some Selected Print

  Colour fastness is one of the important factors in case of buyers demand. The outstandingly important property of a dyed material is the fastness of the colour (Warring and Hallas, 1990).

• Colour Fastness Testing

  Colour fastness tests establish the fitness for purpose of the fabric and help identify the appropriate care label instructions.

• The Results and Discussion of Artificial Joint Systems

  We found that decreasing contact pressure resulted in a reduction of particle length, particle width, and wear rate (Figure 2(a) and Table 1). We also observed that, under the same contact pressure, rubbing PEEK pins against the surface L le